Klippon® Connect TTB Range for instrument transformer wiring
In power transmission and distribution, current and voltage transformers are used primarily for protection and measurement functions. Weidmüller has developed the new Klippon® Connect TTB Series instrument transformer terminals for this application, for particularly simple and safe wiring
Weidmüller is supplementing its u-remote family with two-channel analogue input and output modules
Even in digital production, analogue signals are still required for plant and machine automation, in addition to digital signals, in order to optimally control processes. In smaller or decentralised applications, however, often only a few analogue input and output signals are required. Modules with four or eight channels are then not fully utilised and thus generate unnecessary additional investments. For this purpose, Weidmüller is supplementing its u-remote family with two-channel analogue input and output modules, each of which are available with and without diagnostics.
Weidmüller IoT Gateway: the all-rounder for all IoT applications
Plant automation has been undergoing rapid transformation for years. Weidmüller has always addressed and driven forward the requirements resulting from such change, with the development of smart components like IoT Gateway 30, for example. It establishes the much-required connection from the sensor to the cloud. By acquiring and pre-processing machine data, it ensures that operating costs are kept low.
– customised terminal strips pre-assembled ready for installation, as well as assembled or unassembled empty enclosures – flexible order production and binding delivery times for customised assemblies – Weidmüller Configurator WMC – automated project planning, documentation, requests and ordering
The IIoT allows for the efficient and cost-effective status monitoring of local machines and systems
IoT terminal: quick and simple installation of Industrial IoT solutions - configuration and data monitoring via cloud services – makes it easier to retrofit Industrial IoT for existing systems - integration of all system components into the automation system with the Weidmüller IoT terminal.
Weidmüller Advanced Line managed switches for network redundancy, control and diagnostics
- support for all common protocols such as STP/RSTP or SNMP - high level of flexibility thanks to SFP ports - extremely fast redundancy mechanisms – "Full Managed" and "Lite Managed" versions available
– System for fully-automated terminal block assembly – Simple and reliable assembly – Direct and consistent use of planning data from eCAD systems – Digitalised and automated process chain for panel building
Weidmüller at "interlift 2019" - Hall 2, Booth 2133
Weidmüller FieldPower® Elevator: Innovative shaft wiring system for elevator technology. – FreeCon Contactless: maintenance-free and contactless power transmission solution of up to 240W. – Technical presentation: "Automated Machine Learning makes data analysis tangible".
Weidmüller at “Husum Wind 2019” – Hall 85, Booth B32
Husum Wind 2019: New solution concepts for maximum profitability. – Minimise downtime with BLADEcontrol®. – Increased efficiency and safety with LED system solutions. – Cost-effective maintenance thanks to screw monitoring.
Field-attachable data plug-in connector up to 10 GBit and new modules with SNAP IN connector – power and signal transfer faster than ever before, can be implemented with savings in time and weight – IP65 and IP68 degree of protection / IP69K – Protection against electromagnetic interference
Lightning current arrester for quick installation on 40 mm busbars in the meter cabinet or installation distributor.
– Mandatory surge protection in accordance with the guidelines of DIN VDE 0100-443 and 0100-534 for the mains-side terminal compartment in the meter cabinet or installation distributor.
Semi-automated cable assembly and marking – Modular system for communication-capable cable processing machines and printers – Direct EPLAN import and other CAE programmes via CSV file – All machines can also be used in stand-alone mode
Time-savings through standardisation of workstations – Three-part foam inserts for application-specific drawer layouts – Labelling fields with QR codes for quick identification of missing parts – Option to extend with add-on parts