Modern mobility concepts have to meet demanding requirements. In addition to increasing densification of conurbations and more complex traffic conditions, aspects like sustainable use of resources must also be included in the development of innovative transport technologies. As the transport of people and goods continues to develop in all regions of the world, the responsibility for the intelligent use of modern technology is also growing.
This calls for smart, safe, and economical solutions. Whether for rail vehicles, ships, signalling systems, control and guidance systems: Weidmüller provides you with safe and reliable connection solutions for a wide range of systems and components in the railway industry and shipbuilding. Our goal is to increase your competitiveness with optimally adapted products and solutions.
The space-saving design has been optimised for user- and service-friendliness, the variety of variants increases the flexibility of the signal supply
Customised, particularly compact sensor-actuator terminals (AIO) for structuring and combining initiator and actuator signals
Weidmüller terminal blocks with proven screw connection or innovative PUSH IN technology ensure vibration-proof, gas-tight connections
On the high seas or in rail vehicles, electrical connection solutions are required that are particularly safe, flexible, robust, and resilient. Very high-performance solutions are therefore used for power feeds in switchgear and distribution cabinets. Environmental factors such as high humidity, corrosive atmospheres, high mechanical loads, or vibrations can have a strong impact on switchgear. In our wide product range of high-current terminals for power feed-in, you will find flexible solutions for conductor cross-sections from 35 to 185 mm².
The additional connection for the cross section from 50 mm² up to 185 mm² enables a separate voltage tap. One possible use is as an emergency power supply upstream of the main switch. The lever mechanism enable tool less wiring of flexible conductors.
Large-area marker tags direct attention to an external voltage applied. Fixation of the flash markers in the connection areas of 35 mm² to 185 mm² also prevents circuitry in the live state. This ensures greater safety for man and machine.
Ein standartisierter Prüfabgriff mit 2,0 mm Durchmesser ermöglicht einfaches und schnelles Prüfen. Einheitliches Zubehör garantiert den Einsatz in den Querschnitts-bereichen von 1.5 mm² bis 185 mm² und sorgt für ein schlankes Portfolio an Zubehörteilen.
The cross connections could be installed tool less by latching the wire inside the connection point. The electrical contact will be given with or without a cable inside the connection point. Thanks to their special design, they could be easily identified with or without any conductor connection.
In the demanding environment of rail vehicles and ships, electrical energy must be distributed particularly efficiently and reliably. Perfectly adapted solutions are needed here that address all industry-specific peculiarities. Here, safe operation under extreme requirements such as maximum speeds, strong vibrations and corrosive environments is particularly important. Our solutions are designed to meet these high requirements even under extreme conditions.
All plugs can be connected safely and simply with the base terminals via the locking element
The strain relief protects the contact against mechanical stress and protects the connector against inadvertent release from the contact point.
Through the use of coding pins, individual coding options ensure trouble-free plug-in connection
The cover of the plug contact provides protection against external influences such as contamination by dust. The touch-safe terminal block also remains touch-safe it the plug is absent
In ships and trains, the control voltage distribution must meet the highest requirements due to the high power density and the special environmental conditions. The large number of so-called "important" consumers requires a particularly reliable power supply and thus extremely powerful products. Our latest terminal block series was specially developed for the railway industry and shipbuilding, so that it meets standards of increased safety. And with our customised potential distribution terminal blocks AAP, you can even realise complete control of current distributions in a small space.
Additional connections on the supply pane save on components and assembly time. Depending on the system structure, further space savings of 3.5 or 5.1 mm are possible.
The fuse can be replaced quickly and easily by simply releasing and opening the fuse holder on the system.
The AAP system is completed by the addition of terminal blocks for connecting protective earthing conductors. Protective earthing conductors can be wired centrally and provide clarity in the entire network.
Thanks to the modular system, another terminal block can be attached and expanded using an additional cross-connection in the second cross-connection channel.
In T&D applications, current and voltage transformers are mainly used for protection and measurement functions. Our new TTB range of Klippon® Connect transformer terminal blocks have been designed to meet all the connection requirements of these two critical applications. The wiring of current and voltage transformers can be carried out particularly easily and safely with the new terminal block series – even within complex circuits. The prevention of operating errors during operation increases plant availability and extends the life cycle of the entire control cabinet. The requirements of the end user are therefore fulfilled to the highest degree.
The complete provision of data in the Weidmüller Configurator (WMC) enables a particularly simple selection of safety-critical accessories as well as safe and rational product configuration.
The combination of disconnecting lever, short-circuit bridge and lever link in a single system guarantees that the secondary wiring of a current transformer is short-circuited before the longitudinal disconnection takes place. This "Make Before Break" contact is designed for up to four terminals.
All function-relevant and safety-relevant components are captively connected to the terminal block. This increases the reliability of the current transformer and voltage converter circuits during installation and maintenance work.
The integrated combi-foot enables the fast and flexible mounting of the instrument transformer terminal blocks on common G32 and TH35 mounting rail profiles. This means that retrofitting can take place without the cost-intensive replacement of the mounting rails.
In the railway industry and shipbuilding, safety is paramount. The terminal blocks with PUSH IN connection technology therefore include many products that are particularly suitable for signal wiring in trains or on ships. For example, our AIO series terminal blocks, which can be used in weatherproof distribution boxes or in the cable termination rack of interlocking units. Thanks to the PUSH IN connection technology, they are not only maintenance-free and vibration-proof, but also save time during wiring.
Each conductor – positive, negative, signal or PE – has its own colour. Incorrect wiring is prevented, while installation and maintenance ?????? are made more efficient.
Whether it’s for three- or four-conductor initiators or actuators with and without a protective earth connection, we’ve got the perfect terminal block in our range.
Both rigid conductors and conductors with wire-end ferrules can be reliably connected directly and without the need for any tools. For maximum contact security in a minimum amount of time.
The different potentials can be tested at every contact point. Testing work in the panel is significantly speed up
Especially in many automated applications, electronic components are often affected by electromagnetic influences. This can lead to faults, malfunctions or even the failure of entire systems. We offer you an extensive product range of KLBÜ shielding connections for reliable earthing and shielding of your electronic components.
Ensures simple handling and proper connectin with permanent contact pressure as a result of the spring effect.
Simply swivelled onto the busbar by hand - retrospective if necessary.
Changes in diameter (flow) of the conductor is compensated for by the elastic behaviour of the clamping yoke for flexible adjustment to the cable diameter.
A wide range of fastening methods can be used for the installation of shield connection clamps.
Use the Weidmüller Configurator to quickly and easily configure and request our components. The tool supports continuous engineering workflows from planning with E-CAD systems through to documentation.
Products of the Orange Selection are available at any time. If your order is received by 3 p.m., your items will already be on their way the following day.
We speak the language of our customers. With expertise and passion for the various industries.
Do you have questions about our products and services or would you like an individual offer? Simply fill out contact form. Our employees will contact you as soon as possible.
