Increasingly complex production processes and rapid successive technological leaps in the context of the introduction of Industry 4.0 require new solutions for more efficient control cabinet construction. With Klippon® Connect, you can successfully master all the requirements of present and future. Thanks to customised application products, universal terminal blocks, and process-supporting services, the broad product portfolio includes suitable solutions for every concept in control cabinet construction.
Another highlight are Klippon® Connect terminal blocks with PUSH IN connection technology. The products save space and reduce connection times for solid conductors or conductors with crimped-on wire-end ferrules by up to 50% compared to spring-cage terminals.
All available connection technologies guarantee vibration-proof, gas-tight connections and increase efficiency in control cabinet construction
The clear design and the large number of variants ensure high flexibility with excellent ease of operation and service
With the customised potential distributor and signal wiring terminal blocks, you can achieve high space savings with less wiring effort
An increasing number of components have to be accommodated in the smallest possible space in switchgear and control cabinets. In the context of power feed-in, the connection of conductors is therefore increasingly becoming a challenge – especially with large cross-sections. Our comprehensive range of high-current terminals for power feed-in enables convenient wiring of conductor cross-sections between 35 and 185 mm² even in the tightest of spaces. The compact design and the combination of many practical handling advantages ensure simple, efficient, and space-saving power feed into your switchgear and cabinets.
The additional connection for the cross section from 50 mm² up to 185 mm² enables a separate voltage tap. One possible use is as an emergency power supply upstream of the main switch. The lever mechanism enable tool less wiring of flexible conductors.
Large-area marker tags direct attention to an external voltage applied. Fixation of the flash markers in the connection areas of 35 mm² to 185 mm² also prevents circuitry in the live state. This ensures greater safety for man and machine.
Ein standartisierter Prüfabgriff mit 2,0 mm Durchmesser ermöglicht einfaches und schnelles Prüfen. Einheitliches Zubehör garantiert den Einsatz in den Querschnitts-bereichen von 1.5 mm² bis 185 mm² und sorgt für ein schlankes Portfolio an Zubehörteilen.
The cross connections could be installed tool less by latching the wire inside the connection point. The electrical contact will be given with or without a cable inside the connection point. Thanks to their special design, they could be easily identified with or without any conductor connection.
A reliable power supply to power consumers, such as motors, is crucial for the availability of machines and systems. Ever larger conductor cross-sections have to be connected in the already cramped switch cabinets. As a result, the demands on terminal blocks and distribution blocks are also increasing, presenting control cabinet planners with ever new challenges. Our comprehensive product range for power distribution offers you maximum flexibility right from the planning phase with the ALO, AMC, and AWPD.
When connecting power supply lines to consumers in the control cabinet, there is an increased risk of incorrect wiring due to the large number of conductors. Our customised potential distribution terminal blocks AAP enable a simple and particularly compact design of complete control voltage distributions, which can be implemented individually with or without fusing of the loads. Due to the enormous space savings and the reduced wiring effort, you can easily and effectively ensure the supply of your equipment in the control cabinet.
Additional connections on the supply pane save on components and assembly time. Depending on the system structure, further space savings of 3.5 or 5.1 mm are possible.
The fuse can be replaced quickly and easily by simply releasing and opening the fuse holder on the system.
The AAP system is completed by the addition of terminal blocks for connecting protective earthing conductors. Protective earthing conductors can be wired centrally and provide clarity in the entire network.
Thanks to the modular system, another terminal block can be attached and expanded using an additional cross-connection in the second cross-connection channel.
Due to the high degree of automation, more and more sensors are monitoring the production process today. This also increases the number of signals to be combined and structured. This task quickly becomes a challenge in view of the limited space available in the control cabinet. Our application-specific AIO sensor-actuator terminal blocks are already designed to meet the growing demands placed on signal wiring in the face of increasing automation. Benefit from our customised, compact solutions for the structured wiring of initiator and actuator signals with the I/O modules of your PLC.
Each conductor – positive, negative, signal or PE – has its own colour. Incorrect wiring is prevented, while installation and maintenance ?????? are made more efficient.
Whether it’s for three- or four-conductor initiators or actuators with and without a protective earth connection, we’ve got the perfect terminal block in our range.
Both rigid conductors and conductors with wire-end ferrules can be reliably connected directly and without the need for any tools. For maximum contact security in a minimum amount of time.
The different potentials can be tested at every contact point. Testing work in the panel is significantly speed up
Because the safety and availability of systems must be guaranteed at all times, the careful planning and installation of all protective functions plays a particularly important role. For the safety of life and limb, we have a wide portfolio of protective conductor terminal blocks with different connection technologies in our range. With our diverse range of KLBÜ shield connections, you can implement individual self-adjusting shield contacts and thus ensure trouble-free system operation.
Ensures simple handling and proper connectin with permanent contact pressure as a result of the spring effect.
Simply swivelled onto the busbar by hand - retrospective if necessary.
Changes in diameter (flow) of the conductor is compensated for by the elastic behaviour of the clamping yoke for flexible adjustment to the cable diameter.
A wide range of fastening methods can be used for the installation of shield connection clamps.
Use the Weidmüller Configurator to quickly and easily configure and request our components. The tool supports continuous engineering workflows from planning with E-CAD systems through to documentation.
Products of the Orange Selection are available at any time. If your order is received by 3 p.m., your items will already be on their way the following day.
We speak the language of our customers. With expertise and passion for the various industries.
Do you have questions about our products and services or would you like an individual offer? Simply fill out contact form. Our employees will contact you as soon as possible.
