PCB terminals and connectors
Click on the marker for more information.
The switch-mode power supply converts incoming AC voltage into DC voltage and supplies all of the components integrated in the radio base station. Blackouts and voltage drops in the grid are bypassed due to an integrated supply management concept using alternative sources of electricity, such as batteries, photovoltaic units or generators. Ongoing operations are therefore maintained, even in an emergency. Actually in the event of extreme ambient temperatures, only minimal power losses occur.
In critical network systems such as the radio base station, optimum power distribution is a key element in managing power capacities. Intelligent power distribution means that peak loads are balanced out and power consumption is monitored. The particular challenge here is high performance transmission at the same time within a tight installation situation on the component front.
Environmental conditions such as temperature fluctuations and water penetration can cause extensive damage. To prevent this, the sensors' ambient statuses are ascertained and forwarded to a control system in the radio base station for evaluation. The monitored aspects include for example, battery condition, door status and humidity in the control cabinet. When it comes to this sensitive information, precise transmission of what are often analogue signals, is extremely important.
Reliable transmission of high-frequency data is a basic requirement for radio infrastructure. Applications such as mobile internet and ever-growing data rates call for individual components to be of a high quality. Secure connectivity is indispensable for optimum data wiring within a radio cell. Conventional interface solutions often lead to voice and data losses due to inadequate shielding. In addition, the speed required cannot be achieved due to transmission properties being too low.
High humidity and fluctuating temperatures due to waste heat or solar radiation can limit the performance and service life of electronic components. In particular, increased humidity can cause component corrosion, creeping currents and an increased risk of short-circuiting in the control cabinet. Complying with set temperature and humidity values within a small tolerance range is a considerable challenge. Fan systems or even heating and air-conditioning systems protect the sensitive components in radio base stations.
Move the mouse over the marker for more information.With one click you are automatically redirected to the online catalogue.
Detailed description of the communication and status unit
OMNIMATE Data PCB connectorsIP20 plug-in connector
OMNIMATE Data PCB connectorsCopper cabling solutions
Detailed description of the power supply (Input)
Female plug with 5.08 mm pitchwith "PUSH IN" spring connection
Female plug with 7.62 mm pitchwith "PUSH IN" spring connection
Detailed description of the signal acquisition
PCB terminal with 3.50, 5.00, 7.50mm pitchwith "PUSH IN" spring connection
PCB terminal with 3.xx, 5.0x, 7.xx mm pitchwith "PUSH IN" spring connection
PCB terminal with 3.50 mm pitch with "PUSH IN" spring connection
Detailed description of the radio frequency unit monitoring interface
Detailed description of the control, monitoring and maintenance interfaces
Female plug with 10.16 mm pitchwith clamping-yoke screw connection
Detailed description of the communication and alarm interfaces
Detailed description of the signal I/Os for environment monitoring
Female plug with 3.81 mm pitchwith "PUSH IN" spring connection
Female plug with 3.50 mm pitchwith "PUSH IN" spring connection
Detailed description of the current distribution (Output)
PCB terminal with 15.00 mm pitchwith clamping yoke screw connection
Female plug with 7.62 mm pitchwith PUSH-IN spring connection
Feedthrough terminals for devicesfor conductor cross-sections from 4 to 95 mm²
Detailed description of the power supply (Input/Output)
Female plug with 10.16 mm pitchwith clamping yoke screw connection
Detailed description of the lightning and surge protection
Protection for power systemsVPU Series
Detailed description of the power supply and potential distribution
All connection systemsfor the most diverse requirements
Back to AppGuide
Detailed information and interesting facts in the field of device connectivity.
In our closely networked world, radio base stations have the important job of processing mobile radio operation. The installed devices ensure optimum voice and data transmission, as well as comprehensive availability. The base station must ensure that mobile radio signals are sent, received, encrypted and amplified in a reliable manner, even in adverse weather conditions. It should also be extendable by means of different device components, in order to keep pace with constant developments in mobile radio technology. Increasing numbers of users and ever-growing data volumes mean requirements are becoming more demanding than ever before.
+49 5231 14-0
+49 5231 14-292083