The extra high pin header SLH-THR 5.08 is optimised for the SMT process with Through-Hole-Reflow technology. Combine the SLH-THR 5.08 with the SLDV-THR 5.08 to a compact 3-row connector in 5.08 mm pitch. The resulting connection levels are staggered, and thus provide space for the use of plug-in connectors with screw or PUSH IN connection technology. The solder flanges eliminate additional screws for fixing to the PCB. At the same time the joints are protected from mechanical stress. The headers can be coded manually or precoded on order.
Features:
Safe fire resistance
The high quality plastics meet the fire safety requirements according to the domestic appliance standard IEC 60335-1.
Simple handling
Because the three levels of the male headers are each offset by a half pitch, the terminal points of the screw connection can be easily accessed even while plugged in.
Less space required
The cascading design of the male headers permits the most wires to be connected in the least amount of space on the circuit board.
High power
Because high performance metals are used, it is possible to reach a rated current of 15 A even with the long pins.
Standard-compliant attachment
Additional benefits and less costs: The solder flange reduces 3 production steps to 1 and protects the soldered connections from permanent mechanical stress. No manual assembly, no tightening of the fixing screw - the fastening to the PCB takes automatically place during the soldering process.
| Share with your network: |  |
subscribe to our news: | RSS Feed | Print Page |
Copyright Weidmüller Interface GmbH & Co. KG | Klingenbergstraße 16 | D-32758 Detmold
WEIDMÜLLER WORLDWIDE |
Weidmüller Interface
GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
+49 5231 14-0
+49 5231 14-292083